Cisco Vpn Client For Linux Ubuntu

Posted on by admin



Dec 16, 2019 Connect To VPN Server with Cisco AnyConnect from Linux Terminal For Desktop, launch Cisco AnyConnect Secure Mobility Client from your Desktop. Input VPN server IP address and hit connect key. Then click on change settings to trust the server. Cisco AnyConnect is compatible with Windows 7, 8, 8.1, and 10, Mac OS X 10.8 and later, and Linux Intel (x64). Follow the steps in this article to install the Cisco AnyConnect VPN Mobility Client on a Ubuntu Desktop. In this article, Ubuntu version 20.04 is used.

Installing the VPN Client

  1. Download the Anyconnect VPN client.
  2. From the Terminal, navigate to the Downloads folder and unzip the file by typing [tar xzvf anyconnect-xxx.tar.gz]
    • NOTE: The *actual* file name will contain the name of the current version of the installer (e.g. anyconnect-linux64-4.5.03040-predeploy-k9.tar.gz)
  3. A folder with the same name as the file will appear in the current directory. Open the folder and then go to the vpn directory, and once you are there type [./vpn_install.sh]
  4. The VPN clientwill be installed on your system and the vpnagentd process will be started. This process will be started each time your system is booted.
  5. NOTE: Ubuntu/Debian users should run this command to download a dependency for the VPN UI: [sudo apt-get install libpangox-1.0-0]

Starting the VPN Client

  1. To start the client from the terminal, type [/opt/cisco/anyconnect/bin/vpnui]. Note: if you are not running a GUI, you can enter interactive mode by entering[/opt/cisco/anyconnect/bin/vpn]
    • NOTE: If you are using a desktop environment, you should be able to find the client in one of your menus as well (e.g. in a RHEL environment, look in Applications -> Internet).
  2. In the “Connect to:” box, type vpn.uci.edu and press Return on your keyboard. Note: in interactive mode type [connect vpn.uci.edu]
  3. In the “Group” menu that will appear, select the tunnel you wish to use, usually “UCI” or “UCIFull”. (See the differences in the Tunnels below.)
  4. Enter your UCInetID and password in the appropriate boxes and click “Connect”.
  5. You should get a banner box. When you do, click “Accept” and you are now connected.
Vpn

Possible Error Messages

If you get one of the following messages when you try to connect to the campus VPN service:

Cisco Vpn Client For Linux UbuntuVpn
  • “Connection attempt has failed due to server certificate problem”
  • “AnyConnect cannot confirm it is connected to your secure gateway”

Anyconnect Linux Client

this means that the AnyConnect client cannot validate the certificate on the campus VPN service.

To remedy this, please download and unzip this file and follow the directions in the README file to install the InCommon certificate files on your system.

Ubuntu Linux

Client

If you are using Ubuntu Linux and are having problems using the VPN, Jeff Stern has instructions for making the AnyConnect VPN work on Ubuntu. See
http://www.socsci.uci.edu/~jstern/uci_vpn_ubuntu/ for more information.

Linux Openconnect Client

Note: Using the Linux openconnect software is not supported by OIT. If you have problems using this, OIT will not be able to help you. These instructions are provided for you if you want to use something other than the supported Cisco AnyConnect client on your Linux system.

Cisco

Some Linux distributions include a VPN client called openconnect that can be used with the the UCI VPN service. The instructions below are for Fedora Linux. Other distributions may be similar.

How To Connect To Cisco AnyConnect VPN In Ubuntu

  1. From the terminal, type [sudo openconnect vpn.uci.edu -u UCInetID]
    • replace UCInetID with your actual UCInetID
    • if you don't have openconnect installed, you can download it from your distro's software repo [e.g. sudo apt-get install openconnect]
  2. You will be prompted for the Group to use. Type one of the options, usually UCI or UCIFull (it's not case-sensitive)
  3. You will be prompted for your password. After you give the client your password you will be logged in.

Cisco Anyconnect For Linux

You can minimize the terminal window while you do your work (don’t close it or you will lose your VPN connection). When you are done type ^C (control-c) to terminate openconnect and your VPN session will be logged out.

Cisco Anyconnect VPN Client For Linux - Cisco Community

(Jeff Stern has also written a page on setting up Openconnect for Debian/Ubuntu users, at http://www.socsci.uci.edu/~jstern/uci_vpn_ubuntu/ubuntu-openconnect-uci-instructions.html.)